Bacon with my linux

[aurel]

heloo
post deleted
thanks

[aurel]

Ok
i mess up something or i don't know how to do it.
in help is stated that for installation is need
to run configure
ok
i do that ..then
configuration script run in terminal and seems that everything is ok
then i see Makefile is created..

now i have problem:
in help is :

type # make
In terminal i guess ,,,,,,,, but when i do that nothing heapend ?
why is that ?

thanks


I am using debian based distro

[Pjot]

Hi Aurel,

You have to make sure the development tools are installed. Please try to install the following first, even before executing the 'configure' script:

# sudo apt-get install build-essential
# sudo apt-get install make


After this, run './configure' again and the 'make' command should start compilation.

HTH
Peter

[aurel]

Hi Peter

In distro i use (Miyo Linux) this commands in LX terminal simply there is no any respond.
why ? i don't know.
i found that is gcc 6 already installed .
what i have in folder when i unpack bacon is on image.
And as you can see Makefile is created after i execute configure
distro is devuan(debian spin) based distro with openbox.
so i am not sure how to execute this makefile

[aurel]

Here is a image after configure:

[Pjot]

Dear Aurel,

The Makefile is executed by using "make" on the command line.

Do you have the "make" utility on your system at all? What is the output of

# which make


BR
Peter

[bigbass]

hello aurel

follow Peter's advice to see if make is installed first

the config.log would give more info if you could
attach it in the forum post as a tar.gz file


debian based allows debian package tools to work
but every version of a debian base could come
with many packages preinstalled or the bare minimum

but this should work below
and make sure you run as sudo


Joe


# make sure the package manager is connected
# to the latest packages initialized



sudo apt-get update


# dependencies for bacon

sudo apt-get install enscript
sudo apt-get install xterm
sudo apt-get install indent
sudo apt-get install libfltk1.3

# you may  need these also if you have
# a small debian  distro for the GUI

sudo apt-get install libxft-dev
sudo apt-get install libjpeg-dev
sudo apt-get install libcairo2-dev




./configure --prefix=/usr --enable-gui-fltk

make
sudo make install

[aurel]

The Makefile is executed by using "make" on the command line.

Do you have the "make" utility on your system at all? What is the output of

Hello Peter, Joe ...

I figured that Makefile should be executed by command make
but in my case seems to me that nothing typed in terminal not respond
ok i type what you say

# which make

after that i normally press ENTER

and then nothing

how is that possible ?

[Pjot]

Sept 15, 2019 6:29:16 GMT 1 aurel said:

# which make

after that i normally press ENTER

and then nothing

how is that possible ?

So it seems that you do not have the 'make' utility installed on your system. As mentioned previously, you could install it by something like

# sudo apt-get install build-essential
...or something like that.

HTH
Peter

[aurel]

Hi Peter
I tried that and then again nothing
can i attach this config log ?
it is really large

[aurel]

Hello Joe

I found how to create congig.log.tar.gz file using terminal
I must say that i don't do that any time before
sorry i am not experienced in linux stuff..
when i read that log file it looks to me that missing some header file ..Attachment Deleted
so here it is in attachment

[Pjot]

Thanks Aurel,

I can see that the Makefile is created correctly. In spite of your system lacking the header files for any of the GUI versions, it should compile the binaries properly.

Can you try to execute the attached 'configure' script instead and send us the output you see on the screen? This configure-script will check for the presence of the 'make' utility. If it is not present, the Makefile will not be created.

Note that some distro's need '# sudo apt-get install make' or '# sudo apt-get install make-tool' or some other command to ensure the presence of 'make'.

HTH
Peter

[aurel]

Hi Peter

I see that LXTerminal not respond on make command.
so i open synaptic manager and serch-> make
then i see that make is not installed on my system
then i download and install it , still not work
i reboot computer and then i open terminal inside bacon folder

then
type just - make
process starting to run stated : converting bac files and some kind of counter appears.
after process is finished or breaked i see this:

[Pjot]

Hi Aurel,

Clearly, something is very wrong with your build environment - the error now shows that you are missing the "C++" compiler, so the compilation for the C++ compatible library fails.

You mention a reboot, did you run the './configure' script again, after the reboot? It should detect the presence of the C++ compiler on your system.

BR
Peter

[aurel]

Hi Peter
yes i did run configure again and seems that all things are OK
because configure do not show any error
but make ahow that i don'r have g++

ERROR: g++ not found on this system!

for what he need g++ ?
really strange...