reference documentation manual typo
Jan 27, 2016 7:29:39 GMT 1
Post by rikky on Jan 27, 2016 7:29:39 GMT 1
Ehm, I am still learning the basics of the BaCon , so I found a typo in the reference documentation manual
Chapter Networking
Sub chapter TCP
first example
line 2 : SEND "GET / HTTP/1.1\r\nHost: http://www.basic-converter.org\r\n\r\n") TO mynet
should be : SEND "GET / HTTP/1.1\r\nHost: http://www.basic-converter.org\r\n\r\n" TO mynet
line 8: PRINT total
should be : PRINT total$
Not realy important, everybody would figure this out, but..
Chapter Networking
Sub chapter TCP
first example
line 2 : SEND "GET / HTTP/1.1\r\nHost: http://www.basic-converter.org\r\n\r\n") TO mynet
should be : SEND "GET / HTTP/1.1\r\nHost: http://www.basic-converter.org\r\n\r\n" TO mynet
line 8: PRINT total
should be : PRINT total$
OPEN "www.basic-converter.org:80" FOR NETWORK AS mynet
SEND "GET / HTTP/1.1\r\nHost: www.basic-converter.org\r\n\r\n" TO mynet
REPEAT
RECEIVE dat$ FROM mynet
total$ = total$ & dat$
UNTIL ISFALSE(WAIT(mynet, 5000))
CLOSE NETWORK mynet
PRINT total$Not realy important, everybody would figure this out, but..
